Engineering Success

Demonstrate engineering success in a part of your project by going through at least one iteration of the engineering design cycle.


Problem

In the agricultural sector, enhancing the digestibility and nutritional efficiency of animal feed is crucial. Our project addresses this by using Pichia pastoris GS115 to surface-display thermostable xylanase from Streptomyces thermovulgaris, thereby improving the breakdown of complex carbohydrates in feed. Utilizing the Pichia pastoris yeast vector pZAHR and optimizing with the GTH1 promoter, we aim to develop a stable, efficient, and cost-effective method for direct enzyme production in feed, enhancing both effectiveness and economic viability. Following the engineering design cycle: Design → Build → Test → Learn, we systematically iterated through these stages to achieve our project goals.


Design concept

Xylanase Choice: Streptomyces thermovulgaris

Xylanase Choice: Streptomyces thermovulgaris Xylanases1 are enzymes that degrade xylan, a major component of plant cell walls, into simpler sugars. As feed ylanase Choice: Streptomyces thermovulgaris Xylanases1 are enzymes that degrade xylan, a major component of plant cell walls, into simpler sugars. As feed additives, they play a crucial role in breaking down complex polysaccharides in animal diets, particularly for non- ruminants like poultry and swine. This enzymatic action enhances nutrient availability and digestion, leading to improved feed efficiency, growth performance, and overall health of the animals2. Moreover, the supplementation of xylanase in feed efficiency, growth performance, and overall health of the animals2. Moreover, the supplementation of xylanase in animal feed can significantly reduce feed costs and environmental impact by increasing nutrient absorption and decreasing nutrient excretion3,4.

We chose the xylanase gene from Streptomyces thermovulgaris for yeast surface display due to its exceptional properties. Research5,6 on Streptomyces thermovulgaris has shown that its crude xylanase can hydrolyze KOH-treated corncob and produce bioactive xylooligosaccharides (XOs). The purified enzyme is highly stable across a broad pH range (4.0-11.5) and thermostable between 50-70°C, with maximum activity at 65°C and a half-life of 90 minutes at 70°C. Additionally, the enzyme's products act as prebiotics that promote the growth of probiotic Lactobacillus plantarum, making it an ideal candidate for improving animal feed due to its stability, efficiency, and probiotic support.

Host Choice: E. coli vs. P. pastoris

Escherichia coli is commonly used in laboratories due to its rapid growth and well-understood genetics and tools. However, its use is limited in applications for animal or human consumption because it produces endotoxin of lipopolysaccharides (LPS) on Gram-negative bacterial cell wall, which can trigger immune responses. This intrinsic endotoxicity needs extensive purification to ensure product safety, thereby increasing production costs and complexity.

Pichia pastoris, a yeast recognized as generally regarded as safe (GRAS) by the U.S. Food and Drug Administration (FDA), offers significant advantages for animal feed applications. It facilitates protein glycosylation and proper folding, which are essential for the functional activity of enzymes7. Capable of growing in cost-effective media under high-density conditions, it reduces overall production costs. Moreover, yeast like Pichia pastoris has potential probiotic effects, enhancing gut health in animals8. Therefore, utilizing Pichia pastoris to express xylanase is an optimal choice for developing effective and economical animal feed additives.

Yeast Surface Display System: GCW61 vs. Pir1

The Yeast Surface Display System9 enables the direct use of yeast cells in products, avoiding the need for enzyme purification. This system anchors enzymes to the yeast cell wall, simplifying production and reducing costs. In addition, the system also ensures enzyme stability and activity for applications such as animal feed additives.

GCW6110, one of the glycosylphosphatidylinositol-modified cell wall proteins (GPI-CWPs) in Pichia pastoris, plays a crucial role in maintaining normal morphology in yeast cells. This anchoring enable enzyme anchoring on the cell surface and performing functionality throughout feed processing, ensuring consistent performance in agricultural applications.

Pir111, one of the Proteins with internal repeats (Pir) in Saccharomyces cerevisiae, another key anchor protein in addition to GPI, increases the choices for target proteins to be displayed. It is renowned for forming strong covalent bonds with cell wall components, enhancing enzyme durability under various conditions. This robust attachment keeps enzymes active and intact, supporting sustained industrial processes.

In our project, we explored the application of two promising anchoring protein fusions, GCW61 and Pir1, with xylanase in our yeast surface display system. Our goal was to evaluate their functionality and effectiveness for potential use in animal feed additives, aiming to enhance the nutritional value and digestibility of animal feeds.

Yeast Gene Driving Promoter: AXO1 vs. GTH1

AOX1 (Alcohol oxidase 1) promoter12 is widely used in Pichia pastoris for the production of recombinant proteins due to its strong, inducible nature with methanol as the inducer. While effective in driving high levels of protein expression, the use of methanol introduces complications including toxicity and flammability, which pose safety risks and complicate the production process.

GTH1 (Glucose transporter high affinity 1) gene promoter13, a member of the GAP (glyceraldehyde-3-phosphate dehydrogenase) promoter family, offers a more manageable and safer alternative. Although it functions as a constitutive promoter, its activity is finely tuned by glucose levels—it is repressed by excess glycerol and fully induced by low glucose concentrations, specifically at 0.05 g/L (0.005%). This unique regulation allows for precise control over protein expression, making GTH1 promoter particularly suitable for our purpose and desire with high-level expression, without the safety concerns associated with methanol.

Overview of Evaluation Procedures for Yeast-Based Animal Feed Additives

We selected Pichia pastoris as our host organism to develop animal feed additives. In our laboratory setup, we utilized the GTH1 promoter to drive the expression of xylanase fusion proteins, comparing the functionalities of two anchor proteins, GCW61 and Pir1, within the yeast surface display system. The comparative analysis involved DNS assays for measuring reducing sugars and employing 3D modeling techniques such as I-TASSER, YASARA with the FoldX plugin, and PyMOL. After identifying the more effective anchor protein, we plan to further investigate xylanase gene expression and determine enzyme activity under optimal temperature and pH conditions. In addition, to assess the system’s applicability for animal consumption, we will evaluate its resistance to gastric proteases and analyze the stability of feed processing and the shelf life of our yeast-based products.


GCW61 SURFACE DISPLAY

Design

The sequences of DNA elements for the GTH1 promoter and GCW61 anchor protein were from Pichia pastoris. To ensure flexibility in connecting to target fusion proteins, a GS linker ((GGSG)3) was added at the N-terminus of GCW61. We selected a thermostable xylanase from Streptomyces thermovulgaris6 as our protein of interest. All DNA fragments were synthesized by Integrated DNA Technologies (IDT) following the standard iGEM Part Registry Rule (RFC10)14, which includes prefix cutting sites EcoRI and XbaI, and suffix cutting sites SpeI and PstI. In the issue of the assembly of the fusion protein, we followed the rules created by the Albert-Ludwigs Universität Freiburg iGEM team in 2007 (Freiburg assembly method, officially named by iGEM HQs as RFC25)15 . AgeI cutting site was introduced at C-terminus of the Xylanase gene without the stop codon, and NgoMIV and AgeI sites were introduced at the either end of the GS linker- GCW61 segment.

To create the vector for gene expression in P. pastoris, we utilized the yeast vector pZAHR, developed by Professor Hung-Jen Liu's lab at National Chung Hsing University. This vector is a Zeocin-selectable, AOX1-based Homologous Recombination vector designed specifically for gene knock-in applications in Pichia pastoris. It incorporates the AOX1 gene promoter and terminator to facilitate the integration of desired genes into the Pichia pastoris chromosome through homologous recombination. This process is typically executed following electroporation-directed yeast transformation, a method routinely employed in the Liu's laboratory.

Build

The basic parts were built from DNA elements on the pUCIDT-KAN vector of IDT to the iGEM part registry standard pSB1C3 vector, and, in basic parts, designated GTH1 as a registry number of BBa_K5049000, GS-GCW61 as BBa_K5049001 and Xylanase as BBa_K5049003.

The Xylanase-GCW61 fusion protein was connected using the Freiburg assembly method (RFC25)15 to bypass the stop codon of TAG generated by SpeI-XbaI BioBrick scar, developed by the Albert-Ludwigs Universität Freiburg iGEM team in 2007. The composite part was assembled firstly as a registry name of Xylanase-GCW61 and the number of BBa_K5049004. Then, the final composite part was constructed with GTH1 promoter within the context of the following sequence: EcoRI-XbaI-GTH1 promoter-(SpeI/XbaI scar)-Xylanase-(AgeI/NgoMIV scar)-GS linker-GCW61-AgeI-SpeI-PstI. This functional composite part was given an iGEM part registry name of PGTH1-Xylanase-GCW61 and the number of BBa_K5049006.

To express the gene in Pichia pastoris, the composite part was cloned into the pZAHR vector to create the PGTH1- Xylanase-GCW61/pZAHR construct. This construct was verified through colony PCR, using a primer pair targeting the 5' end of GTH1 and the 3' end of GCW61, which resulted in an approximately 2100-bp DNA fragment (Figure 1A). Additionally, the integrity of the extracted DNA plasmids was confirmed by digestion with restriction enzymes EcoRI and PstI, yielding DNA fragments of 2070 bp for the insert and 3210 bp for the vector (Figure 1B). Furthermore, the gene sequence of the insert was verified through DNA sequencing performed by Genomics BioSci & Tech. Co. Ltd. in Taiwan.

Figure 1 | Verification of PGTH1-Xylanase-GCW61/pZAHR construct.(A) Colony PCR using a GTH1-specific forward primer (5’- CCCCAAACATTTGCTCCCCCTAG-3’) and a GCW61-specific reverse primer (5’-AATCAATAGAGCAACACCGGCTA-3’) yielded an expected 2070-bp DNA fragment. The numbers indicate selected colonies, with lane 2 showing a control derived from a mock pick on a clear zone of the agar plate. (B) Plasmids extracted from three successful colony PCR clones underwent a restriction enzyme analysis with EcoRI and PstI. The expected fragment sizes are 2070 bp for the PGTH1-Xylanase-GCW61 insert and 3210 bp for the pZAHR vector. The first lane on the agarose gels features a 1kb DNA marker (FluoroBand™ 1 KB (0.25-10 kb) Fluorescent DNA Ladder, SMOBIO Technology, Inc.).

Test

The transformed Pichia pastoris carrying either the PGTH1-Xylanase-GCW61/pZAHR construct or the pZAHR vector alone as a control were cultured in BMY media (Buffered Minimal YNB (Yeast Nitrogen Base)). To induce the GTH1 promoter, we added 0.005% (i.e., 0.05 g/L) glucose and incubated the cultures at 28°C for 48 hours to promote xylanase expression. Simultaneously, control groups containing yeast with and without the Xylanase gene were cultured in BMY media without glucose. After incubation, the yeasts were harvested by centrifugation and incubated in the 5% xylan solution at 37°C for 15 minutes to produce xylose. The xylanase activities were measured by the 3,5-dinitrosalicylic acid (DNS) assay. The amount of xylose produced was detected by the color change in the DNS reagent from yellow to reddish-brown at 100°C for 15 minutes, which indicates the presence of reducing sugars. The xylanase activity (Unit/mL/min), is calculated based on the quantity of xylose produced from xylan by the enzyme's catalytic action. For a detailed protocol, including information on prepared buffers and solutions, please refer to our MEASUREMENT page.

In Figure 2, the data clearly demonstrate significant xylanase activity in Pichia pastoris carrying the Xylanase-GCW61 gene when induced with glucose. However, a low background level of enzyme activity was also detected in the absence of glucose, which is attributed to the constitutive nature of the GTH1 promoter. In summary, the detected xylanase activity in whole intact yeast cells implies that GCW61 is an effective anchor protein for displaying enzymes on the surface of Pichia pastoris.

Figure 2 | Xylanase-GCW61 Activity in Glucose-Induced and Non-Induced Pichia pastoris. The yeasts were cultured in BMY media and maintained without glucose as controls for non-induced groups (Yellow bars). For gene expression driven by the GTH1 promoter, transformed yeasts carrying PGTH1-Xylanase-GCW61/pZAHR were induced with 0.005% glucose (right blue bar). After 48 hours at 28°C, the whole yeast cells were harvested and subjected to reducing DNS assays using 5% xylan as the substrate. The intensity of the color change from yellow to brown, measured at OD540, indicates the amount of xylose generated, reflecting xylanase activity. Additional details on enzyme activity calculations can be found on our MEASUREMENT page. Controls carrying only the pZAHR vector were included for both induced (left blue bar) and non-induced conditions (left yellow bar). Error bars represent the standard error from three independent experiments, demonstrating the reproducibility of the findings.

Learn

We engineered Pichia pastoris to express thermostable Xylanase by integrating a genetic construct that included the GTH1 promoter and GCW61 anchor protein. The construct, assembled into the pZAHR vector, was designed to enable surface display of Xylanase for potential application in animal feed. Experimental results confirmed that the induced expression under the presence of glucose significantly enhanced enzyme activity, while a baseline activity was observed in non-induced conditions, due to the constitutive nature of the GTH1 promoter. This demonstrates the efficacy of the GCW61 anchor protein in displaying functional enzymes on yeast cell surfaces, supporting its use in industrial biotechnological applications.


PIR1 SURFACE DISPLAY

Design & Build

Pir1 is another anchor protein of Saccharomyces cerevisiae, widely utilized in yeast display systems. To explore its potential compared to GCW61, we aimed to construct a Xylanase-Pir1 fusion protein. Using the same gene expression strategy as with GCW61, the Pir1 sequence from Saccharomyces cerevisiae was synthesized by Integrated DNA Technologies (IDT) with a GS linker at the N-terminus, flanked by EcoRI-XbaI-NgoMIV as a prefix and AgeI-SpeI-PstI as a suffix. This basic part, GS-Pir1, was assembled into the pSB1C3 vector (BBa_K5049002), and the composite part with Xylanase gene, Xylanase-Pir1 (BBa_K5049005), was generated. The final functional composite part of PGTH1-Xylanase- Pir1/pSB1C3 was then created (BBa_K5049007). To evaluate its performance in yeast and compare it with the GCW61 anchor, the PGTH1-Xylanase-Pir1 construct was cloned into the pZAHR vector. The construct was verified by colony PCR (Figure 3) and confirmed by DNA sequencing.

Figure 3 | Verification of PGTH1-Xylanase-Pir1 Colony PCR using a GTH1-specific forward primer (5’-CCCCAAACATTTGCTCCCCCTAG-3’) and a Pir1-specific reverse primer (5’-AGAAGTTAAAGTTGTGGCTTG-3’) yielded an expected 2346-bp DNA fragment. The numbers indicate selected colonies, with lane 1 showing a 1kb DNA marker on 1% agarose gel in 0.5x TAE buffer (FluoroBand™ 1 KB (0.25-10 kb) Fluorescent DNA Ladder, SMOBIO Technology, Inc.).

Modeling

In order to display xylanase on the yeast surface, the choice of anchor protein is crucial for the beneficial presentation of the target protein, which can determine the application and characteristics of the target protein. Yeast anchor proteins have signal sequences that can guide the transportation of target proteins to the cell surface, thereby anchoring them to the cell wall surface. Before comparing the effect of GCW61 and Pir1 anchor proteins on xylanase activities, we want to understand the 3D structures of wild-type xylanase, xylanase-GCW61, and xylanase-Pir1, along with their ligand binding, active sites, and protein stability features. For this purpose, I-TASSER, YASARA with the FoldX plugin, and PyMOL were utilized as modeling tools. I-TASSER predicts the 3D coordinates of protein models based on sequence-to-structure-to-function predictions. YASARA, enhanced with the FoldX plugin, provides detailed stability analysis and predicts the effects of mutations on protein stability and interactions. PyMOL enables the visualization and analysis of the predicted structures to assess structural changes and interaction sites. These analyses provide critical insights into the functional impacts of the fusion proteins on enzymatic activity and stability. For details, please check our MODELING page.

3D protein structure modeling tools and references:

  1. TASSER16,17,18 was utilized for predicting and scoring ligand binding site residues and active site residues. Each residue set includes a C-SCORE, which indicates the confidence of the predicted interactions and site specifications.
  2. YASARA19/FoldX20 was used for calculating the stability of each variant, expressed in kcal/mol, which helps in understanding the structural integrity and potential functional efficiency of each variant under different conditions.
  3. I-TASSER & PyMOL21 were employed for generating and visualizing the 3D structure images of each variant, allowing detailed observation of molecular architecture and potential functional sites.

Amino acid sequences of xylanase variants with anchor proteins

Xylanase-WT

Xylanase-GCW61

Xylanase-Pir1

Result of 3d protein structure modeling

Table 1 | Comparison of Xylanase Variants in Terms of Ligand Binding Sites, Active Sites, Stability, and 3D Structures

* Ligand binding site residues and active site residues predicted by I-TASSER with C-SCORE representing a confidence score for estimating the quality of predicted models.

** Stability in terms of free energy (kcal/mol) predicted by YASARA with FoldX plugin using models from I-TASSER

*** Protein 3D structure output generated by PyMOL using models from I-TASSER

Figure 4 | (A) Xylanase (B) Xylanase-GCW61 (C) Xylanase-Pir1.The 3D protein models were generated by I-TASSER and imported into PyMOL for visualization. The models are colored by secondary structures: turquoise for alpha-helices, purple for beta-sheets, and pink for unstructured or flexible loops. Sphere colors: blue for GS linkers, and red for either GCW61 or Pir1 anchor proteins. Glowing residues highlight: yellow for the predicted active sites, and green for the original catalytic triad.

Xylanase from Streptomyces thermovulgaris has a conserved catalytic dyad consisting of two glutamate (Glu) residues (E82-E171), similar to other xylanases22,23. We modeled wild-type xylanase (Xylanase-WT), Xylanase-GCW61, and Xylanase-Pir1 using I-TASSER to predict their 3D structures. The modeling results and 3D simulated protein structure were shown in Table 1 and Figure 4. The active site residues in Xylanase-WT matched published data22,23, with residues 82 and 171 showing high confidence scores (C-SCORE: 0.637). The stability of Xylanase-WT was calculated to be 182.1 kcal/mol.

For Xylanase-GCW61, the ligand binding sites were consistent with the wild-type, but the active site residues showed a lower confidence score (C-SCORE: 0.459). The stability decreased to 351.7 kcal/mol. Similarly, Xylanase-Pir1 exhibited different ligand binding sites and a lower confidence score for the active site residues (C-SCORE: 0.218), with the lowest stability of 951.93 kcal/mol.

These findings indicate that while Xylanase-GCW61 and Xylanase-Pir1 maintain the essential active sites, their overall stability is compromised compared to the wild-type. This suggests potential challenges in protein expression levels and stability, which require further experimental validation.

Using Experimental Data to Validate and Develop the Xylanase-GCW61 Model

To develop and validate our model, we used precise measurements of the xylanase-GCW61 enzyme and its mutants. We created mutants of Xylanase-GCW61 (E82A and E171A) to address the predicted catalytic glutamate residues' role in xylanase activity, with the assistance of Prof. Hung-Jen Liu at National Chung Hsing University. DNS assays were conducted to quantify the enzyme activity, as detailed in our ENGINEERING and MEASUREMENT pages. The results showed in Table 2 that the activity levels of Xylanase-GCW61 (E82A) and Xylanase-GCW61 (E171A) were below the detection threshold, in contrast to the high activity of wild-type Xylanase-GCW61 at 106±14 Unit/mL/min. These measurements were crucial for validating our model, as they confirmed the essential role of the catalytic dyad in xylanase activity. This empirical data directly influenced the accuracy and reliability of our 3D structural models and stability predictions, ensuring that our computational predictions aligned with observed enzymatic functions. These findings are consistent with published research on xylanase engineering24,25, thereby reinforcing the robustness of our model.

Table 2 | Comparison of Xylanase Variants in Terms of Ligand Binding Sites, Active Sites, Stability, and 3D Structures

*Note: N.D. indicates no detectable activity.

In our modeling, we utilized computational tools such as I-TASSER, YASARA with FoldX, and PyMOL to model the 3D structures and assess the stability of xylanase variants from Streptomyces thermovulgaris. Xylanase-GCW61 and Xylanase-Pir1 were modeled and compared against wild-type xylanase. Despite maintaining essential active sites, the stability of the engineered variants was compromised. Experimental validation using DNS assays confirmed the critical role of the catalytic dyad in xylanase activity. Our findings highlight the importance of selecting suitable anchor proteins for functional enzyme display in yeast systems, while also addressing challenges related to protein stability.

Test

In order to verify the activity of xylanase displayed on the yeast surface, we conducted a DNS assay to compare the activities of Xylanase-GCW61 and Xylanase-Pir1. Following the same procedure as in previous experiments, glucose- induced whole cells of Pichia pastoris harboring the respective plasmid DNAs were collected at 24-hour intervals over a 96-hour period. The cells were mixed with 5% xylan and incubated at 37°C for 15 minutes. Subsequently, DNS solution was added, and the mixture was heated at 100°C for 15 minutes to halt the enzyme activities and facilitate color development. After cooling the samples on ice for 5 minutes, the extent of color change was measured at OD540. The results were converted to enzyme activity, expressed as Units/mL/min, consistent with our prior measurements.

As shown in Figure 5, the enzyme activities of Xylanase-GCW61 and Xylanase-Pir1 displayed on the surface of Pichia pastoris exhibited distinct trends. Xylanase-GCW61 activity peaked at approximately 109 Units/mL/min after 48 hours but rapidly declined over the subsequent two days. In contrast, Xylanase-Pir1 activity showed a gradual increase, reaching around 91 Units/mL/min at 72 hours before slightly decreasing. And the activities of wild-type xylanase (Xylanase-WT) without an anchor protein showed a background level of around 22-24 Units/mL/min, demonstrating the effectiveness of using either GCW61 or Pir1 as anchor proteins in the yeast surface display system. Given our objective of using yeast carriers as animal feed additives, where rapid protein induction and enzymatic activity are critical for cost efficiency, we selected Xylanase-GCW61 for further experimentation. This upcoming study is designed to serve as a proof-of-concept, demonstrating the practical application and effectiveness of this approach in real-world feed additive scenarios.

Figure 5 | Comparison of Xylanase Activities in Yeast Surface Display System. This figure illustrates the xylanase activities of wild-type xylanase (Xylanase-WT) without an anchor protein (yellow line), Xylanase-GCW61 (blue line), and Xylanase-Pir1 (red line) expressed in Pichia pastoris. The yeast strains carrying these genes were cultured in BMY media and induced with 0.005% glucose (0.05g/L) for 96 hours, with samples collected at 24-hour intervals. Xylanase activity was determined using DNS assays, with methods and calculations as previously described. Error bars represent the standard error from three independent experiments, demonstrating the reproducibility of the findings.

Learn

Xylanase-Pir1 exhibited measurable enzymatic activity in our assays, despite 3D modeling data suggesting a less than optimal ligand binding sites geometry and unfavorable free energy dynamics. This discrepancy underscores the critical importance of using biochemical assays to validate computational models, as theoretical predictions can occasionally diverge from observed enzyme functionality.

For Xylanase-GCW61, both structural modeling and kinetic assays yielded positive results, confirming an ideal active site conformation and significant catalytic efficiency. In addition, the biochemical enzyme activity assays further supporting these findings, reinforcing the observed high levels of enzyme functionality. These robust outcomes enhanced our confidence as we proceed to the proof-of-concept study, strongly providing the potential of Xylanase- GCW61 for effective real-world application in enzyme-mediated processes.


PROOF OF CONCEPT

In order to create an effective animal feed additive, especially for pigs, we have demonstrated the activities of the Xylanase-GCW61 fusion protein within the Pichia pastoris surface display system. Based on these promising results, the following sections will further explore the feasibility of this application across a range of practical parameters. We aim to evaluate the optimal temperature and pH levels for enzyme activity, ensuring functionality in the specific environments of a pig's stomach and small intestine26. Additionally, we tested the enzyme's resistance to gastric proteases, including pepsin and trypsin, to assess its durability and functionality within the animal's digestive system. For processing as animal feeds27, we explored the temperature tolerances necessary for maintaining enzymatic activity. Following this, we evaluated the shelf-life in a freeze-dried form28, which is crucial for ensuring the long-term viability and efficacy of the enzyme when used in commercial feed additives. These comprehensive analyses are designed to provide a convincing proof-of-concept for the application of Xylanase-GCW61, highlighting its practical viability and operational benefits.

Xylanase Protein Expression

Electroporation Transformation

We transformed Pichia pastoris GS115 with the linearized plasmid PGTH1-Xylanase-GCW61/pZAHR using electroporation. The plasmid DNA was prepared by digesting 10 μg of the vector with SacI and dissolving it in sterile water. This linear plasmid DNA was then added to competent cells and kept on ice before electroporation at 25 μF, 1.5 kV, and 0.5 msec using the ECM 830 Square Wave Mode in the BTX Gemini System. Following electroporation, cells were recovered in 1 M sorbitol and incubated at 28°C for 2-4 hours. The cells were then plated on YPDS (Yeast Peptone Dextrose Sorbitol) agar plates containing 2000 μg/ml Zeocin and incubated at 28°C for 3-5 days until colonies were visible (Figure 6). This high concentration of Zeocin ensured the selection of successfully transformed colonies.

Figure 6 | Electroporation Transformation of Pichia pastoris GS115.Selection of Pichia pastoris GS115 transformants carrying the PGTH1-Xylanase-GCW61/pZAHR plasmid on YPDS agar plates containing 2000 μg/ml Zeocin. Colonies were visible after 3-5 days of incubation at 28°C (marked with red circles).

Immunofluorescence Assay (IFA)

To confirm the expression of the Xylanase-GCW61 fusion protein, we performed an immunofluorescence assay. Induced cultures of transformed Pichia pastoris were collected, and cells were fixed with formaldehyde on microscope slides. Following fixation, the cells were blocked and incubated with a primary antibody (Anti-6×His) and a secondary antibody (Goat anti-mouse IgG-FITC). The microscope slides were then washed and mounted for fluorescence microscopy. The immunofluorescence images showed significant expression of the Xylanase-GCW61 fusion protein on the cell surface after induction with 0.005% glucose for 24 hours (Figure 7). This confirmed the successful surface display of xylanase in our yeast system.

Figure 7 | Immunofluorescence Assay for Transformed P. pastoris Displaying Xylanase-GCW61.Immunofluorescence detection of Xylanase-GCW61 expression in Pichia pastoris GS115 transformants. The images include bright field, fluorescent field, and merged pictures for both control and xylanase-GCW61 expressing cells. Cells were induced with 0.005% glucose for 24 hours and stained with Anti-6×His primary antibody and Goat anti-mouse IgG-FITC secondary antibody.

SDS-PAGE & Coomassie Blue Analysis

To further analyze the expression and molecular weight of the Xylanase-GCW61 fusion protein, we performed SDS- PAGE. Transformed Pichia pastoris cells were lysed using glass beads and the protein extracts were prepared. These samples were run on a 10% SDS-PAGE gel and stained with Coomassie Brilliant Blue. The expected size of the Xylanase- GCW61 fusion protein is 37.75 kDa. The SDS-PAGE analysis revealed distinct bands corresponding to this molecular weight, confirming the expression of the fusion protein in the transformed yeast strains (Figure 8). The intensity of these bands indicated significant levels of protein expression, verifying the efficiency of our expression system.

Figure 8 | SDS-PAGE analysis of xylanase-GCW61 expression in Pichia pastoris GS115 transformants.Lane M: protein marker; Lane 1: untransformed control; Lanes 2-4: three different clones expressing Xylanase-GCW61. The expected size of the Xylanase-GCW61 fusion protein is 37.75 kDa.

Xylanase Stability and Optimal Temperature

As potent animal feeds using yeast cells carrying Xylanase on the surface, the products must tolerate the food manufacturing process and endure variations in temperature and pH levels. After verifying the surface display and protein expression of Xylanase, we want to investigate the enzyme's stability and determine the optimal temperature and pH values for its activity.

For the temperature stability test (Figure 9, red line), Xylanase-displayed whole yeast cells were dissolved in 50 mM Tris-HCl buffer (pH 8) and subjected to various temperatures ranging from 15°C to 85°C for 10 min. The untreated group was set as the 100% enzyme activity baseline, measured by the DNS assay as previously described. The data indicated that high activities were maintained up to 45°C, with over 90% activity. Between 55°C and 85°C, the enzyme activity remained around 70% to 90%, suggesting that the yeast-displayed enzyme could endure both the body temperature of livestock (38°C - 40°C)26 and the higher temperatures involved in animal feed processing (70°C - 85°C)27 .

To determine the optimal temperature for Xylanase activity, we performed DNS assays at various temperatures ranging from 15°C to 85°C, instead of the standard DNS assays conducted at 37°C (Figure 9, blue line). The highest thermovulgaris was found to be 65°C, consistent with findings by Boonchuay et al.5,6 activity, observed at 65°C, was set as 100%. The optimal temperature for Xylanase activity from Streptomyces. In addition, our analysis demonstrated that Xylanase activity remained high, between 75% and 100%, across a temperature range of 35°C to 65°C. This suggests that the enzyme functions effectively at the pig's intestinal temperature of around 38°C to 40°C26.

Figure 9 | Temperature Stability and Optimal Temperature of Xylanase Activity. Red line:For stability testing, Xylanase-displayed yeast cells were dissolved in 50 mM Tris-HCl buffer (pH 8) and subjected to various temperatures from 15°C to 85°C for 10 minutes before being measured by the DNS assay at 37°C. The untreated group was set as the 100% enzyme activity baseline. Blue line: The optimal temperature was determined by performing DNS assays at different temperatures as indicated, with the highest activity observed at 65°C set as 100% enzyme activity baseline. Error bars represent the standard error from three independent experiments, demonstrating the reproducibility of the findings.

Xylanase Stability and Optimal pH Level

Food animals experience pH variations26, including pH 3-4 in the stomach and pH 6-7.5 in the intestine. In addition to temperature stability, we evaluated the stability and optimal pH for Xylanase activity to ensure its functionality under varying pH levels encountered in the animal digestive system and during feed processing. To prepare the different pH buffers for the following studies, please refer to our MEASUREMENT page.

For the pH stability test (Figure 10, red line), Xylanase-displayed whole yeast cells were dissolved in 50 mM sodium phosphate buffer for pH 6-8 and 50 mM citric acid-sodium buffer for pH 3-5, then treated at 37°C for 10 minutes. The treated lysates were centrifuged, and the supernatants were discarded. The resulting pellets were resuspended in 50 mM Tris-HCl buffer (pH 8), followed by DNS assays. The untreated group was set as the 100% enzyme activity baseline. The data showed that the yeast cell-displayed Xylanase maintained over 50% activity across a pH range of 3 to 8, with the highest activity at pH 5 (81.25%). Although some Xylanase activity was lost, the enzyme remained sufficiently active to be effective in the stomach and intestine.

On the other hand, we tested the optimal pH level for yeast cell-displayed Xylanase by DNS assays at 37°C for 15 minutes at different pH levels in 50 mM sodium phosphate buffer for pH 6-8, and 50 mM citric acid-sodium buffer for pH 3-5 (Figure 10, blue line). The highest activity, observed at pH 5, was set as 100%. Although activities may reduce to less than 50% under pH 4, over 80% of Xylanase activities were maintained between pH 5-7, suggesting its feasibility in the pig intestine environment, which typically has a pH around 6-7.

Figure 10 | pH Stability and Optimal pH level of Xylanase Activity. Red line: Xylanase-displayed whole yeast cells were dissolved in 50 mM sodium phosphate buffer for pH 6-8 and 50 mM citric acid-sodium buffer for pH 3-5, then treated at 37°C for 10 minutes. The treated lysates were centrifuged, and the supernatants were discarded. The resulting pellets were resuspended in 50 mM Tris-HCl buffer (pH 8), followed by DNS assays. The untreated group was set as the 100% enzyme activity baseline. Blue line: The optimal pH was determined by performing DNS assays at different pH buffers ranging from pH 3-8 as indicated, with the highest activity observed at pH 5 set as 100% enzyme activity baseline. Error bars represent the standard error from three independent experiments, demonstrating the reproducibility of the findings.

Xylanase Resistance to Gastric Proteases

Pepsinogen is secreted by the stomach lining and is activated to pepsin in the acidic environment of the stomach. Trypsinogen, secreted by the pancreas, is converted to trypsin in the small intestine, where it operates in a more alkaline environment. Pepsin and trypsin are protease, which may break down the feeds supplemented with yeast-displayed Xylanase29 .

Therefore, we treated whole yeast lysates containing Xylanase at 37°C for 2 hours in 50 mM citric acid-sodium buffer (pH 2.0) with 0.5% pepsin and in 50 mM sodium phosphate buffer (pH 8.0) with 0.5% trypsin, respectively. The reactions were then centrifuged, and the supernatants were removed. The resultant pellets were dissolved in Tris-HCl (pH 8.0) for DNS assays. Mock controls were treated under the same conditions but without pepsin or trypsin, and the Xylanase activities from these controls were set as the 100% baseline. As demonstrated in Figure 11, both pepsin and trypsin- treated groups retained nearly 50% of enzyme activities, indicating the effectiveness of yeast-displayed Xylanase in the physiological conditions of pig bodies.

Figure 11 | Enzyme Activity of Yeast-Displayed Xylanase After Protease Treatment. Whole yeast lysates containing Xylanase were treated at 37°C for 2 hours in 50 mM citric acid-sodium buffer (pH 2.0) with 0.5% pepsin and in 50 mM sodium phosphate buffer (pH 8.0) with 0.5% trypsin, respectively. The reactions were then centrifuged, and the supernatants were removed. The resultant pellets were dissolved in Tris-HCl (pH 8.0) for DNS assays. Mock controls were treated under the same conditions but without pepsin or trypsin, and the Xylanase activities from these controls were set as the 100% baseline. Error bars represent the standard error from three independent experiments, demonstrating the reproducibility of the findings.

Freeze-Dried Xylanase Shelf Life

To enhance the preservation of the enzyme for commercial applications, we aimed to freeze-dry β-xylanase and store it at room temperature for extended periods. We consulted Prof. Hung-Jen Liu at National Chung Hsing University for guidance on this issue. With his lab’s help, we concentrated the culture broth containing yeast-displayed Xylanase tenfold, freeze-dried it, and stored it at 37°C for various durations. The enzyme was rehydrated with sterile distilled water and subjected to DNS assays. The activity of the untreated culture broth was set as the 100% baseline. The relative activity was plotted over time. Figure 12 showed that the Xylanase expressed by Pichia pastoris GS115 carrying Xylanase- GCW61 retained over 80% activity after 16 weeks at 37°C, demonstrating consistent trends. This result suggests that our production method yields a stable product with significant potential for marketing.

Figure 12 | Long-Term Stability of Freeze-Dried Xylanase. The 10-fold concentrated yeast broth containing Xylanase was freeze-dried into powders. The powders were incubated at 37°C for 2, 4, 6, 8, and 16 weeks, then resuspended in sterile ddH2O prior to DNS assays. The control was the yeast- displayed Xylanase lysates without freeze-dry treatment, with enzyme activity from the control set as the 100% baseline. Error bars represent the standard error from three independent experiments, demonstrating the reproducibility of the findings.


CONCLUSION

Our project, aimed at improving animal feed digestibility and nutritional efficiency, utilizes Pichia pastoris GS115 to surface-display thermostable xylanase from Streptomyces thermovulgaris. This approach targets the Sustainable Development Goals (SDGs) 2 (Zero Hunger) and 12 (Responsible Consumption and Production) by enhancing the breakdown of complex carbohydrates in feed. We systematically followed the engineering design cycle (Design → Build → Test → Learn) to develop a stable and efficient method for enzyme production.

The yeast surface display system compared two anchor proteins, GCW61 and Pir1, with the GTH1 promoter driving xylanase expression. 3D modeling tools (I-TASSER, YASARA with FoldX, and PyMOL) and DNS assays validated the functionality and stability of the xylanase variants. Experimental results showed significant xylanase activity and stability, particularly with the GCW61 anchor protein.

Further testing confirmed the enzyme's stability under various temperature and pH conditions, essential for its functionality in the animal digestive system and during feed processing. Resistance to gastric proteases (pepsin and trypsin) and long-term stability in a freeze-dried form demonstrated the enzyme's potential for commercial applications.

Our project successfully demonstrated the engineering success and practical viability of using Pichia pastoris GS115 to surface-display thermostable xylanase for enhancing animal feed digestibility. The findings highlight the potential of this method to improve livestock feed efficiency safely and cost-effectively, aligning with the goals of sustainable agriculture and responsible consumption. The robustness of our approach, validated through comprehensive experimental and modeling analyses, supports its application in real-world feed additive scenarios.


REFERENCE

  1. Chakdar H, Kumar M, Pandiyan K, Singh A, Nanjappan K, Kashyap PL, Srivastava AK. Bacterial xylanases: biology to biotechnology. 3 Biotech. 2016 Dec;6(2):150. doi: 10.1007/s13205-016-0457-z. Epub 2016 Jun 30. PMID: 28330222; PMCID: PMC4929084.
  2. Ramatsui L, Sithole T, Mzimkulu-Ncoyi NH, Malgas S, Pletschke BI. The use of xylanases as additives to feeds: A mini-review of their effect on feed digestion and growth performance of monogastric animals. Microbial Bioprocesses. 2023 Jan 1:83-105
  3. Patent: WO2020009964A1 https://patents.google.com/patent/WO2020009964A1/en
  4. Patent: GB2585029A https://patents.google.com/patent/GB2585029A/en
  5. Boonchuay P, Techapun C, Seesuriyachan P, Chaiyaso T. Production of xylooligosaccharides from corncob using a crude thermostable endo-xylanase from Streptomyces thermovulgaris TISTR1948 and prebiotic properties. Food Science and Biotechnology. 2014 Oct;23:1515-23.
  6. Boonchuay P, Takenaka S, Kuntiya A, Techapun C, Leksawasdi N, Seesuriyachan P, Chaiyaso T. Purification, characterization, and molecular cloning of the xylanase from Streptomyces thermovulgaris TISTR1948 and its application to xylooligosaccharide production. Journal of Molecular Catalysis B: Enzymatic. 2016 Jul 1;129:61-8.
  7. Duman-Özdamar ZE, Binay B. Production of Industrial Enzymes via Pichia pastoris as a Cell Factory in Bioreactor: Current Status and Future Aspects. Protein J. 2021 Jun;40(3):367-376. doi: 10.1007/s10930- 021-09968-7. Epub 2021 Feb 15. PMID: 33587243.
  8. Gil de Los Santos D, Gil de Los Santos JR, Gil-Turnes C, Gaboardi G, Fernandes Silva L, França R, Gevehr Fernandes C, Rochedo Conceição F. Probiotic effect of Pichia pastoris X-33 produced in parboiled rice effluent and YPD medium on broiler chickens. PLoS One. 2018 Feb 15;13(2):e0192904. doi: 10.1371/journal.pone.0192904. PMID: 29447227; PMCID: PMC5814009.
  9. Teymennet-Ramírez KV, Martínez-Morales F, Trejo-Hernández MR. Yeast Surface Display System: Strategies for Improvement and Biotechnological Applications. Front Bioeng Biotechnol. 2022 Jan 10;9:794742. doi: 10.3389/fbioe.2021.794742. PMID: 35083204; PMCID: PMC8784408.
  10. Yang J, Huang K, Xu X, Miao Y, Lin Y, Han S. Cell Surface Display of Thermomyces lanuginosus Lipase in Pichia pastoris. Front Bioeng Biotechnol. 2020 Oct 28;8:544058. doi: 10.3389/fbioe.2020.544058. PMID: 33195113; PMCID: PMC7656992.
  11. Martinić Cezar T, Lozančić M, Novačić A, Matičević A, Matijević D, Vallée B, Mrša V, Teparić R, Žunar B. Streamlining N-terminally anchored yeast surface display via structural insights into S. cerevisiae Pir proteins. Microb Cell Fact. 2023 Sep 7;22(1):174. doi: 10.1186/s12934-023-02183-2. PMID: 37679759; PMCID: PMC10483737.
  12. Kielkopf CL, Bauer W, Urbatsch IL. Expression of Cloned Genes in Pichia pastoris Using the Methanol-Inducible Promoter AOX1. Cold Spring Harb Protoc. 2021 Jan 4;2021(1). doi: 10.1101/pdb.prot102160. PMID: 33397779.
  13. Prielhofer R, Reichinger M, Wagner N, Claes K, Kiziak C, Gasser B, Mattanovich D. Superior protein titers in half the fermentation time: Promoter and process engineering for the glucose-regulated GTH1 promoter of Pichia pastoris. Biotechnol Bioeng. 2018 Oct;115(10):2479-2488. doi: 10.1002/bit.26800. Epub 2018 Aug 8. PMID: 30016537; PMCID: PMC6221138.
  14. iGEM Registry of Standard Biological Parts: Standards/Assembly/RFC10 https://parts.igem.org/Help:Standards/Assembly/RFC10
  15. iGEM Registry of Standard Biological Parts: Assembly standard 25 https://parts.igem.org/Help:Assembly_standard_25
  16. Wei Zheng, Chengxin Zhang, Yang Li, Robin Pearce, Eric W. Bell, Yang Zhang. Folding non-homology proteins by coupling deep-learning contact maps with I-TASSER assembly simulations. Cell Reports Methods, 1: 100014 (2021).
  17. Chengxin Zhang, Peter L. Freddolino, and Yang Zhang. COFACTOR: improved protein function prediction by combining structure, sequence and protein-protein interaction information. Nucleic Acids Research, 45: W291-299 (2017).
  18. Jianyi Yang, Yang Zhang. I-TASSER server: new development for protein structure and function predictions, Nucleic Acids Research, 43: W174-W181, 2015.
  19. Krieger, E., Dunbrack, R. L., Hooft, R. W. W., & Vriend, G. (2012). YASARA View—molecular graphics for all devices—from smartphones to workstations. Bioinformatics, 28(3), 253-254. YASARA
  20. Schymkowitz, J., Borg, J., Stricher, F., Nys, R., Rousseau, F., & Serrano, L. (2005). The FoldX web server: An online force field. Nucleic Acids Research, 33(suppl_2), W382-W388. FoldX
  21. Schrödinger, LLC. (2015). The PyMOL Molecular Graphics System, Version 1.8.
  22. Kim IJ, Kim SR, Bornscheuer UT, Nam KH. Engineering of GH11 Xylanases for Optimal pH Shifting for Industrial Applications. Catalysts. 2023; 13(11):1405. doi:10.3390/catal13111405
  23. Zarafeta D, Galanopoulou AP, Leni ME, Kaili SI, Chegkazi MS, Chrysina ED, Kolisis FN, Hatzinikolaou DG, Skretas G. XynDZ5: A New Thermostable GH10 Xylanase. Front Microbiol. 2020 Apr 24;11:545. doi: 10.3389/fmicb.2020.00545. PMID: 32390953; PMCID: PMC7193231.
  24. Bianchetti CM, Takasuka TE, Deutsch S, Udell HS, Yik EJ, Bergeman LF, Fox BG. Active site and laminarin binding in glycoside hydrolase family 55. J Biol Chem. 2015 May 8;290(19):11819-32. doi: 10.1074/jbc.M114.623579. Epub 2015 Mar 9. PMID: 25752603; PMCID: PMC4424323.
  25. Ko EP, Akatsuka H, Moriyama H, Shinmyo A, Hata Y, Katsube Y, Urabe I, Okada H. Site-directed mutagenesis at aspartate and glutamate residues of xylanase from Bacillus pumilus. Biochem J. 1992 Nov 15;288 ( Pt 1)(Pt 1):117-21. doi: 10.1042/bj2880117. PMID: 1359880; PMCID: PMC1132087.
  26. Jan Bureš, Věra Radochová, Jaroslav Květina, Darina Kohoutová, Martin Vališ, Stanislav Rejchrt, Jana Žďárová Karasová, Ondřej Soukup, Štěpán Suchánek, Miroslav Zavoral. Wireless Monitoring of Gastrointestinal Transit Time, Intra-Luminal Ph, Pressure and Temperature in Experimental Pigs: A Pilot Study. ACTA MEDICA, Vol 66 No 1 (2023), 11–18. doi: 10.14712/18059694.2023.9.
  27. Kiarie EG, Mills A. Role of Feed Processing on Gut Health and Function in Pigs and Poultry: Conundrum of Optimal Particle Size and Hydrothermal Regimens. Front Vet Sci. 2019 Feb 19;6:19. doi: 10.3389/fvets.2019.00019. PMID: 30838217; PMCID: PMC6390496.
  28. Bolla PA, Serradell Mde L, de Urraza PJ, De Antoni GL. Effect of freeze-drying on viability and in vitro probiotic properties of a mixture of lactic acid bacteria and yeasts isolated from kefir. J Dairy Res. 2011 Feb;78(1):15-22. doi: 10.1017/S0022029910000610. Epub 2010 Sep 8. PMID: 20822567.
  29. Low AG. The activity of pepsin, chymotrypsin and trypsin during 24 h periods in the small intestine of growing pigs. Br J Nutr. 1982 Jul;48(1):147-59. doi: 10.1079/bjn19820097. PMID: 6809038.